cosmikdebriis
New member
This thread is in two parts. The first is simply how to remove/replace the DB Killer (that's a baffle to us old guys).
The next part will deal with my ideas to modify the original design to make a variable sound DB Killer.
DB Killer Removal/Replacement.
Pcture 1
First job is to pry off a little tag that has been spot welded to the silencer. I'd guess this is to conform to some sort of legislation so be wary of any legal implications it's removal may have.
Just wedge a small screwdriver under it and tap it with a hammer. It's only held on with a very light tack weld.
Picture 2
Next you need to remove a fairly large circlip so use a decent set of circlip pliers. Once you have removed the circlip you can simply withdrae the DB Killer using long nose pliers or similar.
Picture 3
Picture showing the baffle removed and... no... there aren't any prizes for the first person to say " my wife has one of those in the bottom of her knicker drawer ;-)
The next part will deal with my ideas to modify the original design to make a variable sound DB Killer.
DB Killer Removal/Replacement.
Pcture 1
First job is to pry off a little tag that has been spot welded to the silencer. I'd guess this is to conform to some sort of legislation so be wary of any legal implications it's removal may have.
Just wedge a small screwdriver under it and tap it with a hammer. It's only held on with a very light tack weld.
Picture 2
Next you need to remove a fairly large circlip so use a decent set of circlip pliers. Once you have removed the circlip you can simply withdrae the DB Killer using long nose pliers or similar.
Picture 3
Picture showing the baffle removed and... no... there aren't any prizes for the first person to say " my wife has one of those in the bottom of her knicker drawer ;-)